Categories
cloud data center fpga science & technology

MIT Puts 36-Core Internet on a Chip | EE Times

Partially connected mesh topology
Partially connected mesh topology (Photo credit: Wikipedia)

Today many different interconnection topologies are used for multicore chips. For as few as eight cores direct bus connections can be made — cores taking turns using the same bus. MIT’s 36-core processors, on the other hand, are connected by an on-chip mesh network reminiscent of Intel’s 2007 Teraflop Research Chip — code-named Polaris — where direct connections were made to adjacent cores, with data intended for remote cores passed from core-to-core until reaching its destination. For its 50-core Xeon Phi, however, Intel settled instead on using multiple high-speed rings for data, address, and acknowledgement instead of a mesh.

via MIT Puts 36-Core Internet on a Chip | EE Times.

I commented some time back on a similar article on the same topic. It appears now the MIT research group has working silicon of the design. As mentioned in the pull-quote, the Xeon Phi (which has made some news in the Top 500 SuperComputer stories recently) is a massively multicore architecture but uses a different interconnect that Intel designed on their own. These stories as they appear get filed into the category of massively multicore or low power CPU developments. Most times the same CPUs add cores without significantly drawing more power and thus provide a net increase in compute ability. Tilera, Calxeda and yes even SeaMicro were all working along towards those ends. Either through mergers, or cutting of funding each one has seemed to trail off and not succeed at its original goal (massively multicore, low power designs). Also along the way Intel has done everything it can to dull and dent the novelty of the new designs by revising an Atom based or Celeron based CPU to provide much lower power at the scale of maybe 2 cores per CPU.

Like this chip MIT announced Tilera too was originally an MIT research product spun off of the University campus. Its principals were the PI and a research associate if I remember correctly. Now that MIT has the working silicon they’re going to benchmark and test and verify their design. The researchers¬†will release the verilog hardware description of chip for anyone use, research or verify for themselves once they’ve completed their own study. It will be interesting to see how much of an incremental improvement this design provides, and possibly could be the launch of another Tilera style product out of MIT.

Categories
gpu mobile technology

Rise of the Multi-Core Mesh Munchkins: Adapteva Announces New Epiphany Processor – HotHardware

Epiphany Processor from Adapteva
Epiphany Block Diagram

Many-core processors are apparently the new black for 2011. Intel continues to work on both its single chip cloud computer and Knights Corner, Tilera made headlines earlier this year, and now a new company, Adapteva, has announced its own entry into the field.

via Rise of the Multi-Core Mesh Munchkins: Adapteva Announces New Epiphany Processor – HotHardware.

A competitor to Tilera and Intel’s MIC ¬†has entered the field as a mobile processor, co-processor. Given the volatile nature of chip architectures in the mobile market, this is going to be hard sell for some device designers I think. I say this as each new generation of Mobile CPU gets more and more integrated features as each new die shrink allows more embedded functions. The Graphic processors are now being embedded wholesale into every smartphone cpu. Other features like memory controllers and baseband processors will now doubt soon be added to the list as well. If Adapteva wants any traction at all in the Mobile market they will need to further their development of the Epiphany into a synthesizable core that can be added to an existing cpu (most likely a design from ARM). Otherwise trying to stick with being a separate auxiliary chip is going to hamper and severely limit the potential applications of their product.

Witness the integration of the graphics processing unit. Not long ago it was a way to differentiate a phone but required it to be integrated into the motherboard design along with any of the power requirements it required. In a very short time, after GPUs were added to cell phones they were integrated into the CPU chip sandwich to help keep manufacturing and power budget in check. If the Epiphany had been introduced around the golden age of discrete chips on cell phone motherboards, it would make a lot more sense. But now you need to be embedded, integrated and 100% ARM compatible with a fully baked developer toolkit. Otherwise, it’s all uphill from the product introduction forward. If there’s an application for the Ephiphany co-processor I hope they concentrate more on the tools to fully use the device and develop a niche right out of the gate rather than attempt to get some big name but small scale wins on individual devices from the Android market. That seems like the most likely candidates for shipping product right now.